VkButton - tsawo na bincike don aiki a cikin hanyar sadarwar jama'a VKontakte

Wani lokaci masu amfani suna barin kwamfuta don dan lokaci don ya iya kammala wani aiki na kansa. Bayan kammala aikin, PC zai ci gaba da rago. Don kaucewa wannan, saita saita lokaci na barci. Bari mu ga yadda za a yi wannan a cikin tsarin Windows 7 a hanyoyi daban-daban.

Saita lokaci zuwa kashe

Akwai hanyoyi da dama da ke ba ka izinin saita barci a Windows 7. Dukkansu za a iya raba su manyan manyan kungiyoyi: kayan aiki na kayan aiki da kayan aiki na ɓangare na uku.

Hanyar 1: Shafuka na Uku

Akwai wasu abubuwan amfani na ɓangare na uku da suka kware a saitin lokaci don kashe PC. Ɗaya daga cikinsu shine SM Timer.

Sauke SM Timer daga shafin yanar gizon

1. Bayan an kaddamar da fayil ɗin shigarwa da aka sauke daga Intanet, maɓallin zaɓi na harshen zai buɗe. Mu danna maballin a cikinta "Ok" ba tare da ƙarin manipulation ba, tun da harshen da aka shigar da shi zai dace da harshe na tsarin aiki.



2. Kusa da bude Wurin Saita. Sa'an nan kuma danna maballin "Gaba".



3. Bayan haka, buɗe yarjejeniyar lasisin lasisi. Ana buƙatar sake shirya canji zuwa matsayin "Na yarda da kalmomin yarjejeniyar" kuma danna maballin "Gaba".



4. Ƙarin ɗawainiyar ɗawainiya yana fara. A nan, idan mai amfani yana buƙatar shigar da gajerun hanyoyi a kan Tebur kuma a kan Farawa farawato, dole ne a raba da sigogi masu dacewa.



5. Bayan haka, taga za ta buɗe, inda za ka iya bayanin bayani game da saitunan shigarwa da mai amfani ya shiga. Muna danna maɓallin "Shigar".



6. Bayan shigarwa ya cika, Wurin Saita bayar da rahoto a cikin wani taga daban. Idan kana so SM Timer ya buɗe a nan gaba, to kana buƙatar duba akwatin kusa da "Kaddamar da SM Timer". Sa'an nan kuma danna "Kammala".



7. Ƙananan taga na SM Timer aikace-aikace farawa. Da farko, a saman filin daga jerin sunayen da aka sauke ka buƙatar zaɓi ɗaya daga cikin hanyoyi guda biyu na aiki na mai amfani: "Kashe kwamfutar" ko "Yanayin Ƙarshe". Tun da yake muna fuskantar aiki na kashe PC ɗin, za mu zaɓi zaɓi na farko.



8. Na gaba, ya kamata ka zaɓi lokacin zabin lokaci: cikakken ko dangi. Tare da cikakke, an saita daidai lokacin tafiyar. Zai faru ne lokacin da lokaci na lokaci da aka ƙayyade da agogon tsarin kwamfuta ya daidaita. Domin saita wannan zaɓin zaɓin, za a sake canzawa zuwa matsayin "A". Kashi na gaba, ta yin amfani da maɓuɓɓuka biyu ko gumaka "Up" kuma "Down"da ke hagu zuwa dama na su, saita lokacin ƙayyadaddun lokaci.

   

   Lokacin dan lokaci yana nuna tsawon sa'o'i da minti bayan an kunna timar PC za a kashe. Don saita shi, saita sauyawa zuwa matsayi "Ta hanyar". Bayan haka, kamar yadda yake a cikin akwati na baya, mun saita adadin sa'o'i da minti bayan abin da za a yi amfani da shi.



9. Bayan an yi saitunan da aka sama, danna kan maballin "Ok".

Kwamfutar za a kashe, bayan lokacin saita lokaci, ko a lokacin da aka ƙayyade, dangane da abin da aka zaɓa na zaɓin zaɓi.

Hanyar 2: Yi amfani da kayan aiki na ɓangare na uku

Bugu da ƙari, a wasu shirye-shiryen, babban aiki wanda ba shi da mahimmanci ga batun da aka yi la'akari, akwai kayan aiki na biyu don rufe kwamfutar. Musamman sau da yawa wannan dama za a iya samu a torrent abokan ciniki da kuma daban-daban masu sauke fayil. Bari mu dubi yadda za a tsara dakatarwa ta PC ta amfani da misali na aikace-aikacen Mai Saukewa.

1. Muna kaddamar da Shirin Jagora Mai Saukewa kuma shigar da fayilolin don saukewa a ciki kamar yadda aka saba. Sa'an nan kuma danna a saman menu na sama a kan matsayi "Kayan aiki". Daga jerin jeri, zaɓi abu "Jadawalin ...".



2. Saitunan shirin Mai Saukewa na budewa. A cikin shafin "Jadawalin" duba akwatin "Gyara Fitar". A cikin filin "Lokaci" Mun nuna ainihin lokacin a cikin kwanakin, mintuna da sakanci, idan yayi daidai da agogon tsarin PC, za a kammala saukewa. A cikin toshe "Lokacin da aka kammala jadawalin" saita kaska kusa da saiti "Kashe kwamfutar". Muna danna maɓallin "Ok" ko "Aiwatar".

Yanzu, idan lokacin da aka ƙayyade, an sauke saukewa a cikin shirin Mai Sake Mai saukewa, nan da nan bayan PC ɗin zai kulle.

Darasi: Yadda ake amfani da Download Master

Hanyar 3: Run taga

Abinda ya fi dacewa don fara na'ura mai kwakwalwa ta atomatik tare da kayan aikin kayan aikin Windows shi ne don amfani da bayanin kalma a cikin taga Gudun.

1. Don buɗe shi, rubuta haɗin Win + R a kan keyboard. An fara aiki. Gudun. A cikin filinsa yana buƙatar fitar da waɗannan lambobi:

   shutdown -s -t

   Sa'an nan kuma a cikin filin guda ya kamata ka sanya sarari ka kuma sanya lokacin a cikin seconds, bayan da PC ya kamata a kashe. Wato, idan kana buƙatar kashe kwamfutar bayan minti daya, sa'annan ya kamata ka sanya lambar 60idan a cikin minti uku - 180idan a cikin sa'o'i biyu - 7200 da sauransu Matsakaicin iyaka shine 315360000 seconds, wanda shine shekaru 10. Saboda haka, cikakken lambar da za a shigar a filin Gudun lokacin da saita lokaci na minti 3, zai yi kama da wannan:

   shutdown -s -t 180

   Sa'an nan kuma danna maballin "Ok".



2. Bayan wannan, tsarin yana aiwatar da bayanin kalma da aka shigar, kuma sakon yana bayyana cewa yana cewa za a rufe kwamfutar bayan wani lokaci. Wannan sakon bayani zai bayyana kowane minti daya. Bayan lokacin da aka ƙayyade, PC zai kashe.

Idan mai amfani yana son kwamfuta ta rufe shirye-shirye da karfi lokacin da aka rufe, koda kuwa ba a ajiye takardun ba, ya kamata ka saita Gudun bayan ƙayyade lokacin da tafiya zai faru, saitin "-f". Sabili da haka, idan kuna son rikitarwa ta tilasta faruwa bayan minti 3, ya kamata ku shigar da shigarwa ta gaba:

shutdown -s -t 180 -f

Muna danna maɓallin "Ok". Bayan haka, koda shirye-shirye da takardun da basu da ceto akan PC ba, za a kammala su, kuma za'a kashe kwamfutar. Idan ka shigar da magana ba tare da saiti ba "-f" Kwamfuta ba tare da saita lokaci ba zai kashe har sai an ajiye takardun da hannu idan shirye-shirye tare da abubuwan da basu da ceto suna gudana.

Amma akwai yanayin da shirin mai amfani ya iya canzawa kuma zai canza tunaninsa don kashe kwamfutar bayan mai amfani da lokaci. Daga wannan matsayi akwai hanyar fita.

1. Kira taga Gudun ta latsa maɓallan Win + R. A cikin filinmu mun shigar da wadannan maganganun:

   shutdown -a

   Danna kan "Ok".



2. Bayan haka, sakon yana fitowa daga tarkon yana nuna cewa an soke sokewa ta dakatar da kwamfutar. Yanzu ba zai kashe ta atomatik ba.

Hanyar 4: ƙirƙiri maɓallin dakatarwa

Amma kullum yunkurin shigar da umarni ta hanyar taga GudunTa shigar da code a can, ba dace sosai ba. Idan kayi tafiya a kai a kai, saita shi a lokaci ɗaya, to, a wannan yanayin akwai yiwu a ƙirƙiri maɓallin farawa na lokaci na musamman.

1. Danna kan tebur tare da maɓallin linzamin linzamin dama. A cikin jerin mahallin da aka buɗe, motsa siginan kwamfuta zuwa matsayi "Ƙirƙiri". A cikin jerin da ya bayyana, zaɓi zaɓi "Hanyar hanya".



2. Fara Wizard na gajere. Idan muna so mu kashe PC rabin sa'a bayan da timer ya fara, wato, bayan hutu 1800, to sai mu shiga cikin yanki "Saka wuri" bayan magana:

   C: Windows System32 shutdown.exe -s -t 1800

   A dabi'a, idan kana so ka saita lokaci don wani lokaci dabam, to, a ƙarshen magana dole ne ka saka lambar daban. Bayan haka, danna maballin "Gaba".



3. Mataki na gaba shine sanya wani suna zuwa lakabin. By tsoho zai kasance "shutdown.exe", amma za mu iya ƙara sunan da ya fi dacewa. Saboda haka, a yankin "Shigar da sunan lakabi" Mun shigar da suna, kallon abin da zai bayyana a yanzu abin da zai faru yayin da aka danna shi, alal misali: "Fara fararen lokaci". Danna kan rubutun "Anyi".



4. Bayan waɗannan ayyukan, ƙaddamar da gajeren lokaci yana nuna a kan tebur. Saboda haka ba mai ban mamaki bane, ana iya maye gurbin madaukakin hanya na gajeren hanya tare da icon mai ƙari. Don yin wannan, danna kan shi tare da maɓallin linzamin linzamin dama sa'annan a lissafin dakatar da zaɓi a kan abu "Properties".



5. Maɓallin kaddarorin farawa. Matsar zuwa sashe "Hanyar hanya". Danna kan rubutun "Canza icon ...".



6. An bayyana faɗakarwar bayani don nuna cewa abu shutdown babu lamba. Don rufe shi, danna kan batun "Ok".



7. Zaɓin zaɓi na zaɓi ya buɗe. Anan zaka iya zaɓar gunkin kowane dandano. A cikin irin wannan alamar, misali, zaka iya amfani da wannan icon kamar lokacin da ka kashe Windows, kamar yadda a cikin hoton da ke ƙasa. Kodayake mai amfani zai iya zaɓar wani don dandano. Saboda haka, zaɓi gunkin kuma danna maballin. "Ok".



8. Bayan da gunkin ya bayyana a cikin dakin magungunan, zamu kuma danna maɓallin a can "Ok".



9. Bayan haka, za a canza nuni na gani na gunkin farawa don na'urar ta atomatik na PC akan kwamfutar.



10. Idan a nan gaba ya zama wajibi ne don sauya lokacin ƙwaƙwalwar kwamfuta daga lokacin da lokaci ya fara, misali, daga rabin sa'a zuwa awa ɗaya, to, a cikin wannan yanayin muna komawa ga kayan haɓakar gajeren hanya ta hanyar menu mahallin kamar yadda aka ambata a sama. A bude taga a filin "Object" canza lambobi a ƙarshen magana tare da "1800" a kan "3600". Danna kan rubutun "Ok".

Yanzu, bayan danna kan gajeren hanya, kwamfutar zata kashe bayan awa 1. Hakazalika, zaka iya canja lokacin kashewa zuwa wani lokaci.

Yanzu bari mu ga yadda za a ƙirƙiri maɓallin don soke dakatarwar kwamfuta. Bayan haka, halin da ake ciki lokacin da ya kamata ka soke ayyukan da aka yi ba ma sababbin ba ne.

1. Gudun Label wizard. A cikin yankin "Saka wurin wurin abu" muna yin magana mai zuwa:

   C: Windows System32 shutdown.exe -a

   Danna maballin "Gaba".



2. Matsayin zuwa mataki na gaba, sanya sunan. A cikin filin "Shigar da sunan lakabi" shigar da sunan "Sake dakatar da PC" ko wata ma'ana mai dacewa. Danna kan lakabin "Anyi".



3. Bayan haka, ta amfani da wannan algorithm kamar yadda aka bayyana a sama, zaka iya zaɓar gunkin don gajeren hanya. Bayan haka, za mu sami maɓallan guda biyu a kan tebur: daya don kunna mai sarrafa motsi ta atomatik bayan lokacin da aka ƙayyade, da ɗayan don soke aikin da ya gabata. Lokacin yin amfani da maniyyi daidai da su daga tarkon, sakon zai bayyana game da halin yanzu na aikin.

Hanyar 5: Yi amfani da Shirye-shiryen Taskar

Hakanan zaka iya tsara kullun PC bayan wani lokacin da aka ƙayyade ta amfani da madaidaicin Tashoshin Tashoshin Windows.

1. Don zuwa aikin jadawalin aiki, danna maballin "Fara" a cikin kusurwar hagu na allon. Bayan haka, zaɓi matsayi a jerin. "Hanyar sarrafawa".



2. A cikin bude wuri, je zuwa sashen "Tsaro da Tsaro".



3. Gaba, a cikin asalin "Gudanarwa" zabi matsayi "Taswirar Ɗawainiya".

   

   Har ila yau, akwai hanya mafi sauri don zuwa jadawalin aiki. Amma zai dace da waɗannan masu amfani waɗanda suke amfani da su don haddace haɗin umarni. A wannan yanayin, dole ne mu kira makamin da aka saba Gudunta latsa haɗin Win + R. Sa'an nan kuma kana buƙatar shigar da kalma a cikin filin "taskchd.msc" ba tare da fadi ba kuma danna kan batun "Ok".



4. Lissafin aiki ya fara. A cikin yanki na dama, zaɓi matsayi "Ƙirƙirar aiki mai sauki".



5. Yana buɗe Wizard Creation Wizard. A mataki na farko a fagen "Sunan" ya bi aikin don bada sunan. Zai iya zama gaba ɗaya. Babban abu shi ne cewa mai amfani da kansa ya fahimci abin da yake game da shi. Bada sunan "Lokaci". Danna maballin "Gaba".



6. A mataki na gaba, zaku buƙatar saita faɗakarwar aikin, wato, ƙayyade tsawon lokacin aiwatar da shi. Matsar da canjin zuwa matsayi "Da zarar". Danna maballin "Gaba".



7. Bayan haka, taga yana buɗe inda kake buƙatar saita kwanan wata da lokaci lokacin da za a kunna wutar lantarki. Saboda haka, an ba shi a cikin lokaci a cikin cikakkiyar sharudda, kuma ba a cikin sharuddan dangi, kamar yadda yake ba. A cikin matakan da suka dace "Fara" Mun saita kwanan wata da lokaci daidai lokacin da aka katse PC ɗin. Danna kan rubutun "Gaba".



8. A cikin taga mai zuwa dole ka zaɓi aikin da za a yi lokacin da lokacin da aka bayyana a sama ya auku. Ya kamata mu taimaka wannan shirin. shutdown.exeda muka riga muka yi amfani da taga Gudun da gajeren hanya. Sabili da haka, mun saita canjin zuwa "Gudun shirin". Danna kan "Gaba".



9. Fila yana buɗe inda kake buƙatar saka sunan shirin da kake so ka kunna. A cikin yankin "Shirye-shiryen ko Rubutun" Shigar da cikakken hanyar zuwa shirin:

   C: Windows System32 shutdown.exe

   Mun danna "Gaba".



10. Fila yana buɗewa inda aka gabatar da cikakken bayani game da aikin bisa ga bayanan da aka shigar. Idan mai amfani bai gamsu da wani abu ba, sannan danna kan batun "Baya" don gyarawa. Idan duk abin komai ne, duba akwatin kusa da "Buɗe maɓallin Properties bayan danna maɓallin Finish.". Kuma danna kan rubutu "Anyi".



11. Maɓallan kayan aiki ya buɗe. Game da saitin "Gudu tare da halayen mafi girma" saita kaska. Canja a filin "Musanya don" saka a matsayi "Windows 7, Windows Server 2008 R2". Mu danna "Ok".

Bayan haka, za a yi aiki da aikin kuma kwamfutar zata rufe ta atomatik a lokacin da mai tsarawa ya tsara.

Idan wata tambaya ta taso yadda za a kashe na'ura mai ƙyama na kwamfutar a Windows 7, idan mai amfani ya canza tunaninsa don kashe kwamfutar, yi wadannan.

1. Gudanar da jadawalin aiki a kowane irin hanyoyin da aka tattauna a sama. A gefen hagu na taga, danna kan sunan "Taswirar Taskalin Taskoki".



2. Bayan haka, a saman ɓangaren tsakiyar ɓangaren taga, bincika sunan aikin da aka tsara a baya. Danna kan shi tare da maɓallin linzamin linzamin dama. A cikin mahallin mahallin, zaɓi abu "Share".



3. Sa'an nan kuma akwatin maganganun ya buɗe inda kake buƙatar tabbatar da sha'awar share aikin ta danna "I".

Bayan wannan aikin, za a soke aikin da aka dakatar da PC ɗin.

Kamar yadda kake gani, akwai hanyoyi da yawa don fara na'ura mai ƙyama ta atomatik a lokacin da aka ƙayyade a Windows 7. Bugu da ƙari, mai amfani zai iya zaɓar hanyoyin da za a magance wannan aiki, ko dai tare da kayan aiki na tsarin aiki, ko yin amfani da shirye-shiryen ɓangare na uku, amma ko da a cikin waɗannan wurare biyu tsakanin hanyoyi daban-daban akwai manyan bambance-bambance, saboda ƙimar zaɓin zaɓin ya kamata ya zama barata ta hanyar nuances na halin da ake ciki na aikace-aikace, kazalika da sauƙin mai amfani.